Boat Outfitting

Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 30 [803]

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base...

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 30 [805B]

Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge...

Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 30 [805]

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge...

Weld Mount Manual Dual Pusher Rod f/AT-2010 & AT-4020 - Qty. 10 [805002]

Dual Pusher RodThe AT-500 dual pusher rod is used to dispense equal amounts of our AT-2010 or AT-4020 adhesive for manual mixing. This dual pusher rod can not be used with our AT-300 or AT-350 mixing tips as it does not generate enough force to push...

Weld Mount AT-300 Adhesive Dispensing Gun f/AT-2010 & AT-4020 [80300]

Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges (sold separately) When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.

Weld Mount AT-4020 Acrylic Adhesive [4020]

Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes...

Weld Mount AT-2010 Acrylic Adhesive [2010]

Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working...

Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1419-4L - 4-Blade - 14" x 19 Pitch [21501940]

Hustler® - Left Hand - Aluminum Propeller - LE-1419-4L - 4-Blade - 14" x 19 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one...

Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1417-4L - 4-Blade - 14.5" x 17 Pitch [21501740]

Hustler® - Left Hand - Aluminum Propeller - LE-1417-4L - 4-Blade - 14.5" x 17 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one...

Turning Point Hustler - Right Hand - Aluminum Propeller - LE1/LE2-1323- 3-Blade - 13.25" x 23 Pitch [21432311]

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1323- 3-Blade - 13.25" x 23 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art...

HoseCoil Side Mount Enclosure [HC15S]

Side Mount EnclosureFor cockpit or any onboard washdownHoseCoil's Side Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 15' HoseCoil constructed of high performance polytherester...

HoseCoil Flush Mount Enclosure w/Nozzle [HC15F]

Flush Mount Enclosure with NozzleFor cockpit or any onboard washdownThe highest quality wash down system on the market, HoseCoil's Flush Mount Enclosure includes a quick release lid for hiding and protecting a solid blue 15' HoseCoil. HoseCoil is...