Accessories

Marinco Spring-Loaded Flip Lid Cover [2018MB]

Spring-Loaded Flip Lid CoverThe 4-wire trolling/charging system eliminates the need for a charge/run switch. Install the receptacle on the boat, mount the black plug on the trolling motor and the red plug on the leads of the battery charger. Simply...

T-H Marine Heat Shrink Connector Kit *200-Piece [BE-EL-31640-DP]

Heat Shrink Connector Kit *200-PieceFeatures:Heat-Activated Adhesive SealantUse Heat Gun or Torch to Create a Corrosion-Proof Water-Tight SealHeat-Shrink Tubing has a 3:1 Shrink RatioWhat's Included?(27) Pink - Butt Connectors For 22-18 Gauge (AWG)...

T-H Marine Heat Shrink Connector Kit *64-Piece [BE-EL-31639-DP]

Heat Shrink Connector Kit *64-PieceFeatures:Heat-Activated Adhesive SealantUse Heat Gun or Torch to Create a Corrosion-Proof Water-Tight SealWhat's Included?(12) Pink - Butt Connectors For 22-18 Gauge (AWG) wire(10) Pink - #10 Ring Connectors For 22-18...

Scanstrut ROKK SC-USB-F1 Flip Pro Waterproof USB Socket - Dual Port [SC-USB-F1]

ROKK SC-USB-F1 Flip Pro Waterproof USB Socket - Dual PortFlip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging...

Victron SmartSolar MPPT 150/60-TR Solar Charge Controller - UL Approved [SCC115060211]

SmartSolar MPPT 150/60-TRThe Victron SmartSolar MPPT 150/60 Solar Charge Controller is Bluetooth accessible via either built-in Bluetooth or the Victron Energy Bluetooth dongle. The VictronConnect app is available for free on both iOS and Android. This...

Victron Battery Switch 275A 12-48VDC Surface or Panel Mount [VBS127010010]

Battery Switch 275A 12-48VDC Surface or Panel MountThe Battery Switch ON/OFF 275A is suitable for battery systems up to 48V. It has a unique ergonomic and aesthetic knob design. The knob is removable for isolation or safety purposes.The Battery Switch...

Victron SolidSwitch 104 f/DC Loads Up To 70V/4A [BMS800200104]

SolidSwitch 104 for DC Loads Up To 70V/4AFeatures:The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low-power digital signal.The DC load can be resistive, capacitive or inductive (such as the coil of a high-power...

Victron GX Touch 50 Adapter f/CCGX Cut-Out [BPP900460050]

GX Touch 50 Adapter for CCGX Cut-OutThis adapter is designed to easily replace the CCGX display with the newer GX Touch. Contents of the packaging are the metal bracket, the plastic bezel, and four mounting screws.There are two methods of...

Victron GX Touch 70 Wall Mount [BPP900465070]

GX Touch 70 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.Please contact your dealer for any...

Victron GX Touch 50 Wall Mount [BPP900465050]

GX Touch 50 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.Please contact your dealer for any...

Victron GX Touch 70 Surface Mount Display [BPP900455070]

GX Touch 70The GX Touch 70 is a display accessory for our Cerbo GX. The seven-inch touch screen display gives an instant overview of your system and allows you to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable,...

Victron GX Tank 140 Tank Monitoring f/4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not Included [BPP920140100]

GX Tank 140 Tank Monitoring for 4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not IncludedThe GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which the...